Xerox Printer fwww User Manual page 89

Condition
The CUPS (Common Unix Printing
System) version distributed with SuSE
Linux 9.2 (cups-1.1.21) has a problem
The machine does not
with ipp (Internet Printing Protocol)
print.
printing.Use the socket printing instead of
ipp or install later version of CUPS (cups-
1.1.22 or higher).
This is a known bug in Ghostscript (until
GNU Ghostscript version 7.05) when the
base color space of the document is
indexed color space and it is converted
through CIE color space. Because
Some color images
Postscript uses CIE color space for Color
come out all black.
Matching System, you should upgrade
Ghostscript on your system to at least
GNU Ghostscript version 7.06 or later. You
can find recent Ghostscript versions at
www.ghostscript.com.
This is a known bug in Ghostscript (until
GNU Ghostscript version 7.xx) when the
base color space of the document is
indexed RGB color space and it is
Some color images converted through CIE color space.
come out in Because Postscript uses CIE color space
unexpected color. for Color Matching System, you should
upgrade Ghostscript on your system to at
least GNU Ghostscript version 8.xx or
later. You can find recent Ghostscript
versions at www.ghostscript.com.
It is a known problem that occurs when a
color printer is used on version 8.51 or
earlier of Ghostscript, 64-bit Linux OS,
The machine does not and reported to bugs.ghostscript.com as
print whole pages and Ghostscript Bug 688252.The problem is
its output is half page solved in AFPL Ghostscript v. 8.52 or
printed. above. Download the latest version of
AFPL Ghostscript from
sourceforge.net/projects/ghostscript/
install it to solve this problem.
Suggested solutions
http://
and
Condition
The machine does not
appear on the
scanners list.
14.16
<Troubleshooting>
Suggested solutions
• Check if your machine is attached to
your computer. Make sure that it is
connected properly via the USB port
and is turned on.
• Check if the scanner driver for your
machine is installed in your system.
Open Unified Driver configurator, switch
to Scanners configuration, then press
Drivers. Make sure that driver with a
name corresponding to your machine's
name is listed in the window. Check if
the port is not busy. Since functional
components of MFP (printer and
scanner) share the same I/O interface
(port), the situation of simultaneous
access of different "consumer"
application to the same port is possible.
To avoid possible conflicts, only one of
them at a time is allowed to gain control
over the device. The other "consumer"
will encounter "device busy" response.
This can usually happen while starting
scan procedure, and appropriate
message box appears.
• To identify the source of the problem,
you should open ports configuration and
select the port assigned to your
scanner. Port's symbol /dev/mfp0
corresponds to LP:0 designation
displayed in the scanners' options, /dev/
mfp1 relates to LP:1 and so on. USB
ports start at /dev/mfp4, so scanner on
USB:0 relates to /dev/mfp4 respectively
and so forth sequentially. In the selected
port pane you can see if the port is
occupied by some other application. If
this is the case, you should wait for
completion of the current job or should
press Release port button, if you are
sure that the present port's owner is not
functioning properly.