Replacing The Waste Toner Container - Xerox Printer fwww User Manual

Colour laser mfp
Table of Contents

Advertisement

Replacing the Waste Toner Container

The life of the waste toner container unit is approximately 1,250 pages
for full colour 5% image printing or 5,000 pages for black printing. When
the life span of the waste toner container has expired, Replace/Install
Waste Toner Tank appears on the display of the control panel,
indicating the waste toner container needs to be replaced. Otherwise
your printer stops printing.
To replace the waste toner container:
Turn the machine off, then wait a few minutes for the machine to
1
cool.
Open the front cover.
2
Pull the waste toner container out of the machine using its handle.
3
Note
• Make sure that you lay the waste toner container on a flat
surface so that the toner does not spill.
Remove the container's cap from the container as shown below,
4
and use it to close the waste toner container opening.
Caution
• Do not tilt or turn over the container.
Take a new waste toner container out of its package.
5
Insert the new container into position and then push it to make sure
6
that it is firmly seated in place.
Close the front cover firmly.
7
Caution
• If the front cover is not completely closed, the machine will not
operate.
Turn the machine on.
8
Note
• After rebooting, your machine will automatically reset the
counter for the waste toner container.
13.9
<Maintenance>

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 6110mfp

Table of Contents