Installing Software For Macintosh - Xerox Printer fwww User Manual

9
Using Your Printer with
a Macintosh
Your printer supports Macintosh systems with a built-in USB
interface or 10/100 Base-TX network interface card. When you
print a file from a Macintosh computer, you can use the CUPS
driver by installing the PPD file.
This chapter includes:

• Installing Software for Macintosh

• Setting Up the Printer
• Printing
• Scanning
Installing Software for
Macintosh
The CD-ROM that came with your printer provides you with the
PPD file that allows you to use the CUPS driver or Apple
LaserWriter driver, for printing on a Macintosh computer.
Also, it provides you with the Twain driver for scanning on a
Macintosh computer.
Install the Printer driver
1
Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3
Double-click CD-ROM icon that appears on your
Macintosh desktop.
4
Double-click the MAC_Installer folder.
5
Double-click the MAC_Printer folder.
6
Double-click the Xerox Phaser 6110MFP icon.
7
Enter the password and click OK.
8
The Xerox Phaser 6110MFP Installer window opens. Click
Continue and then click Continue.
9
Select Easy Install and click Install.
10
After the installation is finished, click Quit.
Uninstalling the Printer driver
Uninstall is required if you are upgrading the software, or if
installation fails.
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
3
Double-click the MAC_Installer folder.
32
Using Your Printer with a Macintosh
4
Double-click the MAC_Printer folder.
5
Double-click the Xerox Phaser 6110MFP icon.
6
Enter the password and click OK.
7
The Xerox Phaser 6110MFP Installer window opens. Click
Continue and then click Continue.
8
Select Uninstall and then click Uninstall.
9
When the uninstallation is done, click Quit.
Install the Scan driver
1
Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3
Double-click CD-ROM icon that appears on your
Macintosh desktop.
4
Double-click the MAC_Installer folder.
5
Double-click the MAC_Twain folder.
6
Double-click the Xerox ScanThru Installer icon.
7
Enter the password and click OK.
8
Click Continue.
9
Click Install.
10
Click Continue.
11
After the installation is finished, click Quit.
Uninstalling the Scan driver
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
3
Double-click the MAC_Installer folder.
4
Double-click the MAC_Twain folder.
5
Double-click the Xerox ScanThru Installer icon.
6
Enter the password and click OK.
7
Click Continue.
8
Select Uninstall from the Installation Type and then Click
Uninstall.
9
Click Continue.
10
When the uninstallation is done, click Quit.