Setting Copy Timeout - Xerox Printer fwww User Manual

Erasing background images
You can set the machine to print an image without its background. This
copy feature removes the background colour and can be helpful when
copying an original containing colour in the background, such as a
newspaper or a catalog. This copy feature is only for mono copying.
Press Copy.
1
Load originals face up into the ADF, or place a single original face
2
down on the scanner glass.
For details about loading an original, see page 5.1.
Press Menu until Copy Feature appears on the bottom line of the
3
display and press Enter.
Press the Scroll buttons until Erase Bkgd. appears and press
4
Enter.
Press the Scroll buttons to select On and press Enter.
5
Press Stop/Clear to return to Standby mode.
6
Enter the number of copies using the number keypad.
7
Press Black Start to begin mono copying.
8

Setting copy timeout

You can set the time the machine waits before it restores the default copy
settings, if you do not start copying after changing them on the control
panel.
Press Menu until System Setup appears on the bottom line of the
1
display and press Enter.
Press Enter when Machine Setup appears.
2
Press the Scroll buttons until Timeout appears and press Enter.
3
Press the Scroll buttons until the time setting you want appears.
4
Selecting Off means that the machine does not restore the default
settings until you press Black Start or Color Start to begin copying,
or Stop/Clear to cancel.
Press Enter to save your selection.
5
Press Stop/Clear to return to Standby mode.
6
6.5
<Copying>