Advanced Entry Calibration - Xerox I Class Operator's Manual

5.0.2

Advanced Entry Calibration

Advanced Entry Calibration is the alternate method for special-case media
types. The procedure has two parts:
1) You must list the sensor readings for the label and TOF values using
different algorithms.
2) From your list the best algorithm is chosen, new readings taken and those
values entered.
+
Advanced Entry Calibration will override all previous calibration
settings; this method should be used only when Standard Calibration
has failed.
To perform an Advanced Entry Calibration:
Step Operator Action
(Media should be loaded
1
and the appropriate
Sensor Type selected.)
Turn 'On' the printer.
2
Press the
Raise the printhead
assembly.
3 Press the
to enter the Media
Settings menu.
4 Press the
and scroll to 'Sensor
Calibration'.
5 Press the
I-Class
Displayed Message
Key.
Key
Key
Key.
Comment
Wait until the
printer initializes
(about six
seconds).
You are entering
Menu Mode.
See Section 4.1.2
for menu layout.
Press the
Key to abort this
procedure.
You are entering
the calibration
submenu.
71