Getting Started; Unpacking The Printer - Xerox I Class Operator's Manual

2.0 Unpacking the Printer

Inspect the shipping container(s) for damage; if evident, immediately notify the
shipping company to report the nature and extent of the damage.
The printer has been carefully packaged to avoid damage during transit. In order
to operate the printer, you will need to remove the tape and foam placed there
for shipment. Complete the following steps prior to connecting power or
attempting to load media.
ΠWith the arrow on the box pointing up,
open the box.
• Remove Accessories Box.
Ž Tilt the printer on its side and slide the
printer out of its box.
• Place the printer in an upright position
and remove the packing foam, plastic
bag, and tape.
þ Note: It is a good idea to save the carton and packaging materials in the
event that future shipment is required.
I-Class

Getting Started

9