Xerox I Class Operator's Manual page 57

System Settings (continued)
PAUSE MODE
ENABLED
²DISABLED
PEEL MODE
ENABLED
²DISABLED
SECURITY
SELECT SECURITY
ENABLED
²DISABLED
MODIFY PASSWORD
UNITS OF MEASURE
METRIC
²IMPERIAL
INPUT MODE
²DPL
LINE
I-Class
When enabled, suspends printing between
each label until the PAUSE Key is pressed.
Requires an operator press the PAUSE Key
after each label.
The printer completes label batch without
pausing between labels.
Specifies that a Feed operation be
prevented when the label is presented and
not removed, or if the printer is to wait for
the GPIO start of print signal.
Feed is inhibited according to the above
criteria.
Feed is always enabled.
Provides the user with the ability to
password protect all printer settings made
through the front panel.
Enable or disable the menu system's
security feature.
Password protected.
No protection.
Modify the password required to access the
menu system when security is enabled.
Selects the measurement system in which
the system's settings are represented in the
menu system and on configuration labels.
Metric standard:
millimeters and counters in centimeters.
Inch standard: lengths and counters given
in inches.
Defines the type of printer language.
Standard DPL processing.
Standard DPL processing with addition
Line mode Template processing enabled.
Line Mode exacts data terminated by a
carriage return to be inserted in a DPL
template and printed.
lengths given in
47