System Settings - Xerox I Class Operator's Manual

4.1.5

System Settings

CONFIGURATION FILE
RESTORE AS CURRENT
SAVE SETTING AS
DELETE FILE
FACTORY SETTING FILE
INTERNAL MODULE
²1024 KB
DEFAULT MODULE
²D
SCALEABLE FONT CACHE
²312 KB
SINGLE BYTE SYMBOLS
²PC_850 MULTILINGUAL
I-Class
Options for storage and recall of printer
configuration files. See Appendix F for
details.
Provides a list of available configuration
files. Selecting a file from the list causes a
printer reset; afterward, the printer is
configured according to the activated file.
Saves the entire effective configuration of
the printer to a file. Unique names with up
to nineteen characters are possible.
Provides a list of available configuration
files. Files selected
removed, freeing the module.
þ Note: A currently activated file can not be
.
deleted
Provides a list of available configuration
files. The selected file will be restored
whenever a Level 1 reset is performed; see
Section 4.0.6.2.
Sets the number of 1K blocks allocated for
the internal RAM 'D' module. Available
memory dependent upon model; see
Appendix C.
Sets the default module used to store files
when no other module is specified; see
Appendix C.
Sets the number of 1K blocks allocated for
the scaleable font
memory dependent upon model; see
Appendix C.
Selects the code page used to print single
byte fonts unless otherwise specified in
DPL.
61 selectable sets are standard; see the I &
W Class Programmer's Manual for details.
are immediately
engine. Available
43