Display Messages; User Prompts And Condition Messages - Xerox I Class Operator's Manual

4.2 Display Messages

The printer displays several different types of information (if not in the menu
system or Quick Test Mode):
Ø User Prompts and Condition Messages (also see Section 4.1.1 for a listing
of the Enter/Exit Prompts)
Ø Application and Boot Loader Updating Messages (see Section 5.4 and 5.5)
Ø Fault and Warning Messages (see Section 6.1)
4.2.1

User Prompts and Condition Messages

User Prompts alert the operator to a required action. Condition Messages are
used to indicate an operational state.
Displayed Message
60
User Prompts and Condition Messages
Description
The printer is trying to
clear a fault condition.
A media calibration is
being performed.
The CANCEL or
TEST Key was pressed
during the fault
handling process.
The CANCEL or
TEST Key was pressed
during a batch job.
The printer is paused
or offline.
Condition(s)
Occurs when the FEED
Key is pressed after the
correction of a fault.
The FEED Key was pressed
and held.
The faulted label will be
cancelled if ENTER is
pressed, then the remaining
labels in the batch will be
printed.
The current print batch will
be cancelled if ENTER is
pressed; the remaining
labels will not be printed.
The printer is in a paused
condition.
I-Class