Xerox I Class Operator's Manual page 66

Communications (continued)
HOST SETTINGS
HOST TIMEOUT
²10 SEC
CONTROL CODES
²STANDARD CODES
ALTERNATE CODES
ALTERNATE CODES 2
ALTERNATE CODES 3
FEEDBACK CHARACTERS
ENABLED
²DISABLED
ESC SEQUENCES
²ENABLED
DISABLED
56
Settings which affect all communications
with a host.
The number of seconds a communications
(1-60)
port must be idle before the printer may
process data from a different port. This
value is also used to "timeout" an image /
label format download.
Allows the operator to change the prefix of
the software commands interpreted by the
printer.
Hex 01 = SOH command; Hex 02 = STX
command; count-by = ^; Hex 1B = ESC;
Hex 0x0D = Carriage Return
Hex 5E = SOH command; Hex 7E = STX
command; count-by = @; Hex 1B = ESC;
Hex 0x0D = Carriage Return
Hex 5E = SOH command; Hex 7E = STX
command; count-by = @; Hex 1B = ESC;
Hex 0x7C = Carriage Return
Hex 5E = SOH command; Hex 23 = STX
command; count-by = @; Hex 1B = ESC;
Hex 0x0D = Carriage Return
Returns a Hex 1E, [RS], after each label
successfully prints, and a Hex 1F, [US],
after each batch of labels is printed.
Feedback characters are sent to the host.
No feedback characters are sent.
Allows data containing invalid ESC control
code sequences to be processed.
Normal printer operating mode.
ESC sequences are ignored and the data is
processed. Bitmapped font downloads are
disabled in this mode.
I-Class