Media And Ribbon Requirements - Xerox I Class Operator's Manual

Printing Specifications (continued)
Print Length Range:
with an optional cutter:
with an optional peel &
present mechanism:
Print Justification:
Flash Memory:
SDRAM Memory:

7.1 Media and Ribbon Requirements

Media Types:
Media Roll Capacity
Media Core:
Ribbon Core:
Ribbon Width Range
**
Ribbon Length
*
Wound out labels only.
**
Coated side 'in' or 'out' are NOT interchangeable, but dependent upon the Ribbon
Supply Hub type. Also, the ribbon width should slightly exceed label width (including
the backing material) to protect the printhead.
I-Class
.25" – 99" (6.4 mm – 2514.6 mm) I-4206, I-4208,
.25" – 84" (6.4 mm – 2133.6 mm) I-4406
.25" – 55" (6.4 mm – 1397 mm) I-4604
1.25" – 99" (31.8 mm – 2514.6 mm) I-4206,
1.25" – 84" (31.8 mm – 2133.6 mm) I-4406
1.25" – 55" (31.8 mm – 1397 mm) I-4604
1.50" – 99" (38 mm – 2514.6 mm) I
1.50" – 84" (38 mm – 2133.6 mm) I-4406
1.50" – 55" (38 mm – 1397 mm) I-4604
Left
1 MB I-4206, I-4208
2 MB I-4212, I–4308, I-4406, I-4604
8 MB I-4206, I-4208
16 MB I-4212, I–4308, I-4406, I-4604
Roll-Fed, Die-Cut, Continuous, and Fan-Fold. Flat
on the printable side with no more than .0007"
(.018 mm) protrusions on the opposite side.
*
: 8" (203 mm) outer diameter
1.5" or 3.0" (38 mm or 76.2 mm) inner diameter
1.010"
Core not to protrude beyond ribbon edge.
**
: 1.0" – 4.5" (25.4 mm – 114.3 mm)
: 1968' (600 meters) maximum
I-4208, I-4212, I–4308
.006" (25.6 mm
I-4212, I–4308
I-4208, I-4212, I–4308
-4206,
.2 mm) inner diameter.
105