Xerox I Class Operator's Manual page 50

Printer Options (continued)
CUTTER
ENABLED
²DISABLED
NOT INSTALLED
SCANNER
NOT INSTALLED
MODE
²PICKET FENCE
DISABLED
BARCODES
²CODE 39
IATA
²CODABAR
²INTERLEAVED 2 OF 5
²INDUSTRIAL 2 OF 5
²CODE 93
²CODE 128
²MSI/PLESSEY
²EAN(13/8)
²EAN(13/8)+2
²EAN(13/8)+5
²UPC(A/E)
²UPC(A/E)+2
²UPC(A/E)+5
40
Used to cut media into separate labels.
(The physical presence of a device must be
detected to show the ENABLE/DISABLE
selections.)
Enables cutting.
Disables cutting.
No Cutter is detected.
Used to check the bar codes on the labels.
(The physical presence of a device must be
detected to show the menu selections.)
No Scanner is detected.
Enables bar codes to be read by the
Scanner.
Reads horizontal bar codes (individual
bars appear like the pickets in a fence) as
the label exits the printer.
Disables the scanner.
Enables the scanner to read the respective
bar code. Also see Appendix B.
þ Note: To maximize throughput and decoding
integrity enable only those symbologies that will
be read.
I-Class