Boom Proximity Sensor Installation - Raven AutoBoom XRT Installation Manual

C 4
HAPTER
2. Install the height stop sensor assembly to the bracket shown in Figure 8 on page 23 and secure with panel nuts.
3. Connect the 115-0235-041 cable to the height stop sensor.
4. Use the provided U-bolts to install the center rack position target below the center rack height sensor.
FIGURE 9. Center Rack Position Target

BOOM PROXIMITY SENSOR INSTALLATION

1. Install the proximity sensor assembly to the bracket shown in Figure 10, "Large Tree Proximity Sensor," on
page 24 and secure with panel nuts.
FIGURE 10. Large Tree Proximity Sensor
2. Connect the 115-0235-040 cable to the proximity sensor.
3. Use the provided U-Bolts to install the boom proximity sensor bracket to the center rack cross tube near the
left boom pivot as shown in Figure 11, "Boom Proximity Sensor Bracket," on page 25.
24 AutoBoom® XRT Installation Manual for AGCO RoGator