Rogator 64 series 2006 and older; rogator 74 series 2006 and older; rogator 74 series 2007; rogator 74 series 2008; rogator 84 series 2007; rogator 84 series 2008; rogator 86 series 2007; rogator 86 series 2008; (26 pages)
AccuBoom system. See the Viper Installation and Operators Manual for instructions on setting up the software and using the AccuBoom system. You will also need a valid AccuBoom Control Activation Key for your Viper system in order to activate the AccuBoom system.
Page 4
Case IH SPX3310 AccuBoom AIM Control Extension Cable Installation and Operators Manual Notes:...
Page 5
X T E N S I O N A B L E N S T A L L A T I O N 1. Install the CAN AccuBoom node and SPX3310 CAN AccuBoom cable (P/N 115-0171-553) according to the instructions provided with the CAN AccuBoom cable.
Page 6
Case IH SPX3310 AccuBoom AIM Control Extension Cable Installation and Operators Manual 3. Route the Raven AIM Command cable (P/N 115-0171-577) up to and into the cab. 4. Remove the side panel cover to gain access to the wiring.
Page 7
(P/N 115-0171-577) to the AIM Command Tee cable. b. Connect the supplied tee cap to the other end of the Case AIM Command cable. 7. Replace the side panel cover. 8. The AIM Command module will now be controlled by the Raven CAN AccuBoom system.
How Can I Get Service? Bring the defective part and proof of purchase to your Raven Dealer. If your Dealer agrees with the warranty claim, the Dealer will send the part and proof of purchase to their distributor or to Raven Industries for final approval.
Page 12
P.O. Box 5107 Fax: 605-331-0426 Sioux Falls, SD 57117-5107 www.ravenprecision.com atdinfo@ravenind.com Notice: This document and the information provided are the property of Raven Industries, Inc. and may only be used as authorized by Raven Industries, Inc. All rights reserved under copyright laws.
Need help?
Do you have a question about the AccuBoom and is the answer not in the manual?
Questions and answers