Windows Workstation Messages - Xerox DocuPrint 4050 NPS Message Manual

XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE
49.
This chapter alphabetically lists messages that may appear on your
workstation monitor when you set up and submit jobs to the
DocuPrint NPS. Variable information appears in angle brackets (<>).
"Source" indicates the source of the message—either the DocuPrint
Print Submission software or the DocuPrint print driver.
When more than one action is specified, perform the first action. If the
problem persists, go on to the next action. If you have performed all
of the specified actions and the problem is not resolved, contact your
System Administrator for assistance.
A fatal memory error has occurred. Close some applications
and restart the XPPS application.
Access to the print driver software was attempted, but there is not
enough memory to run the application.
Source DocuPrint print driver
Action Close other applications or add more memory to your workstation.
A Job Name is Required.
A job name was not specified.
Source DocuPrint Print Submission software
DocuPrint print driver
Action Specify a job name for this task.
A Job Ticket must have an extension of .XJT
A Job Ticket was being opened, and an extension other than .XJT
was specified.
Source DocuPrint Print Submission software
DocuPrint print driver
Action Specify .XJT as the extension to the job ticket you want to open.
49Windows workstation
messages
49-1