Xerox DocuPrint 4050 NPS Message Manual page 72

PRINTER CONTROLLER MESSAGES
Message
<INFO> Job Pool Manager: Job %d
purged from database
<INFO> Job Pool Manager:
Partially submitted job (id %d)
removed from system
<INFO> Lpd translator: DocuPrint
lpd protocol translator started
<INFO> Lpd translator: Shutting
down
<WARNING> AppleTalk: Framing
error on Begin/End <%s>
<WARNING> AppleTalk: ProcSet
has no name
<WARNING> AppleTalk: Too many
virtual printers - can't add <printer
name>
<WARNING> AppleTalk: Too much
Document Structure Convention
Nesting
<WARNING> AppleTalk:
Unrecognized Patches line format
<%s>
<WARNING> IOT Model: Can't
open logfile for read in
ParseLogFile
<WARNING> IOT Model: nvma ->
problems! = No Problem after nvm
read of A meter
48-8
Explanation/action
Information about the indicated job has been purged from
the Job Pool Manager database and is no longer available
using the UI. This message displays after a Dump
Accounting Records command or when the system
automatically removes accounting records if it has been
installed with that option.
No action required.
An incomplete job was submitted to the system and has
been removed.
No action required.
The lpd protocol translator is up and running. Jobs may
now be submitted using the lpr.
No action required.
The lpr protocol translator has been manually shut down.
No action required.
There is an error in the Macintosh application that is
sending data to DocuPrint NPS. DocuPrint NPS continues
to function normally.
No action required.
There is an error in the Macintosh application that is
sending data to DocuPrint NPS. DocuPrint NPS continues
to function normally.
No action required.
You have created a 65th virtual printer. You may create
more than 64, but the Chooser menu will display only 64.
There is an error in the Macintosh application that is
sending data to DocuPrint.
No action required if the job is printing normally.
If the job is not printing normally, correct the Macintosh
application error.
There is an error in the Macintosh application that is
sending data to DocuPrint.
No action required if the job is printing normally. If the job
is not printing normally, correct the Macintosh application
error.
There is a read failure.
Restart the system.
If the problem persists, reinstall the system.
The printer has been powered off, or a cable from the
workstation to the printer is either not connected or
connected improperly.
1. Check cable connections and power on the printer.
2. Contact your service representative for assistance.
XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE