Xerox DocuPrint 4050 NPS Message Manual page 35

Message
E091
E092
E093
E094
E095
E096
E097
E098
E099
XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE
Vertical transport lead
edge jam.
Vertical transport trailing
edge jam.
Right front door is open.
Clear paper path behind
right front door.
A jammed sheet was
successfully purged.
Late arrival at pre-
transfer switch.
Late arrival at pre-fuser
switch.
Late departure from pre-
fuser switch.
Late arrival at post fuser
switch.
Explanation/action
1. Clear areas 1A and 2A.
2. Press the Continue button.
The paper fed from either tray 1 or the duplex tray did not
arrive at the vertical transport switch within the allotted
time.
1. Clear area 1.
2. Press the Continue button.
The paper fed from any of the trays did not leave the
vertical transport jam switch in the allotted time.
1. Clear areas 1 and 2.
2. Press the Continue button.
The door was open during printing.
1. Close the right front door while the printer is in
standby mode.
2. Press the Continue button.
A job has not printed and completed a purge sequence.
Clear the entire paper path.
A tray 1 or tray 2 feeder jam occurred, but the paper was
cleared from the feed head during cycledown. The feeder
takeaway roll clutch is turned on for a short period before
the main drives go off.
1. Clear areas 1 and 2.
2. Press the Continue button.
The paper failed to arrive at the pre-transfer switch in time.
1. Clear area 2.
2. Press the Continue button.
The paper failed to arrive at the pre-fuser switch in time.
1. Clear areas 2 and 3.
2. Press the Continue button.
The paper failed to depart from the pre-fuser switch in
time.
1. Clear area 3.
2. Press the Continue button.
The paper failed to arrive to the post fuser switch in time.
1. Clear area 4. (Clear the de-curler, then pull the fuser
and examine it for wraps or accordion jams.)
2. Press the Continue button.
PRINTER CONTROLLER MESSAGES
48-15