Xerox DocuPrint 4050 NPS Message Manual page 29

Message
<WARNING> IOT Model: PSIIOC
GET__IOT__CONFIGURATION
never returned valid info
<WARNING> Job Pool Manager:
Acquire filter <id> removed from
system (prescanner died?)
<WARNING> Job Pool Manager:
Can't open VP file <file> - Unix error
<error number>
<WARNING> Job Pool Manager:
FlexLM procedure <proc> failed
with reason <reason>
<WARNING> Job Pool Manager:
Missing attribute description for
attribute %d
<WARNING> Job Pool Manager:
VP file <file> has corrupt data
<WARNING> Lpd translator:
Attempted read of data file timed
out
<WARNING> Lpd translator: Too
many media specifications to
process, excess ignored
XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE
Explanation/action
The printer has been powered off, or a cable from the
workstation to the printer is either not connected or
connected improperly.
1. Check cable connections and power on the printer.
2. Contact your service representative for assistance.
Indicates a software problem on your system. Restart the
system. If problem persists, contact your service
representative.
Indicates file corruption on your system. Restart the
system. If problem persists, contact your service
representative.
Your software license has been installed incorrectly.
Contact your service representative with the text of this
message.
The job pool database was corrupted.
Restart the system.
Indicates file corruption or an installation problem on your
system. Try restarting the system. If problem persists,
contact your service representative.
A client is sending data to DocuPrint NPS using lpr, is low
on disk space, or is sending a very large file. The file being
sent is automatically removed from the system without
being printed.
Use lpr -s or free up some disk space on the client where
the lpr command is being used.
The -C lpr switch was used to request more kinds of media
than the maximum allowed.
Resubmit the job with fewer media specifications.
PRINTER CONTROLLER MESSAGES
48-9