Xerox DocuPrint 4050 NPS Message Manual page 222

DOS WORKSTATION MESSAGES
51-6
lpr:tab__2__ps: copy file is too large
The lpr command was entered, but the job is too large for it. This is a
limitation of the lpr command, not the DocuPrint print job utility.
Action Allocate more space on the disk drive where the directory tmp
resides.
Memory allocation error:
The print command was entered, but an internal error occurred due
to a lack of memory.
Action Write down the message. Contact your system administrator and
verify that your system meets the minimum memory requirements.
Missing value for option
The print command was entered, but a necessary value for a
specified print option was left out.
Action Refer to the Guide to Submitting Jobs from the Client for acceptable
values for the options.
Non-unique option:
The print command was entered, but the print option specified was
not valid.
Action Refer to the Guide to Submitting Jobs from the Client for acceptable
values for the options.
Print queue name must be specified
The -printerName queue option in the print command line was not
included. This option is required for submitting a job.
Action Reenter the command, making sure to include the -printerName
queue option.
Print request not forwarded, server or directory unreachable
The listjob, listq, or print command was entered, but the software
couldn't communicate with the Printer Controller.
Action Write down the message. Ask your system administrator to check
communication between your workstation and the Printer Controller
and to ensure that the Xerox client was enabled at installation.
Server not responding
You entered the listjob or listq command, but the Printer Controller
failed to respond to the command within the allotted time.
Action Reenter the command. If you see the same message, contact your
system administrator for assistance.
XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE