MESSAGES GUIDE
Print request not forwarded,
server or directory unreachable
The listjob, listq, or print command was entered, but the software
couldn't communicate with the Printer Controller.
Action
Write down the message. Ask your system administrator to check
communication between your workstation and the Printer Controller
and to verify that the file sent is not too large.
Server not responding
The listjob or listq command was entered, but the Printer Controller
failed to respond to the command within the allotted time.
Action
Reissue the command. If you see the same message, contact your
system administrator for assistance.
Server or directory unreachable
The listjob, listq, or print command was entered, but the software
couldn't communicate with the Printer Controller.
Action
Write down the message. Ask your system administrator to check
communication between your workstation and the Printer Controller
and to verify that the file sent is not too large.
SetOfDisp__Create()
The print command was entered, but an internal error occurred.
Action
Write down the message and contact your service representative.
SetOfDisp__Insert()
The print command was entered, but an internal error occurred.
Action
Write down the message and contact your service representative.
System error
The listjob or listq command was entered, but an internal error
occurred due to one of the following conditions:
•
Lack of memory
Action
•
Inability to open a local temporary file
•
Network error.
Too many arguments
In entering the print command, more than 128 options were entered
in the command line.
Action
Reenter the command with 128 or fewer options. Refer to the Guide
to Submitting Jobs from the Client for the correct syntax for the
options.
UNIX WORKSTATION MESSAGES
52-7