Xerox DocuPrint 4050 NPS Message Manual page 24

PRINTER CONTROLLER MESSAGES
Message
<ALERT> Job Pool Manager:
Received signal%d - aborting with
core dump
<ALERT> Job Pool Manager: Unix
error "not enough memory" on
attempted fork
<ALERT> Job Pool Manager:
Unable to fork bulk data transfer
process (Not enough memory)
<ALERT> Job Pool Manager:
Unrecoverable Database error -
<%d><%s> occurred
<ALERT> Job Pool Manager:
Unrecoverable Database error... /
var/db/core: core file from jpm /var/
db/core removed
<ALERT> Lpd translator Lost
connection to remote system while
accepting command input
<ALERT> Lpd translator: The Job
Pool Manager appears to be down
<ALERT> Lpd translator: Received
signal %d - aborting with core dump
<ALERT>Lpd translator: Job Pool
Manager Error 13 returned from
procedure <%s>
<ALERT> Lpd translator: Unable to
determine service information for
printer/tcp
<ALERT> Lpd translator:
Unexpected end of file during
control file transmission
<DEBUG>IOT Model: IOT Model
Server for <%d><%s>
48-4
Explanation/action
The Job Pool Manager has failed.
Restart the system.
The system is unable to start up due to not enough
memory. Restart the system. If problem persists contact
your service representative.
The Job Pool Manager is unable to transfer data due to
memory deficiency.
Restart the system.
If problem persists, notify your system administrator.
The Job Pool Manager database has been corrupted.
The Job Pool Manager automatically recovers by
replacing the corrupted database with a new one. If it does
not recover automatically, use the Config Utility to
reinitialize the database.
The Job Pool Manager database has been corrupted.
The Job Pool Manager automatically recovers by
replacing the corrupted database with a new one. If it does
not recover automatically, use the Config Utility to
reinitialize the database.
The system sending data to the DocuPrint NPS system
has failed while it was sending data to DocuPrint NPS. Any
partially submitted file is automatically removed from the
system and not printed. This condition should not cause
any other DocuPrint NPS problems.
Resend the data.
Job Pool Manager is unavailable.
Restart the system.
Lpr protocol translator process has failed. The system
usually continues to function normally.
If lpr jobs can no longer be submitted to the printer, restart
the system.
The system memory has been exceeded.
Restart the system.
The "/etc/services" file has incorrect information.
Notify your service representative.
Error occurred on the client machine that dispatched the
job to the Printer Controller.
No action required at the Printer Controller. Fix problem at
the client machine
The printer Model server is up and running.
No action required.
XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE