Xerox DocuPrint 4050 NPS Message Manual page 235

MESSAGES GUIDE
Can't open local printer file: <path>
Your software is missing an internal file that is needed for printing.
Action Verify that the directory /usr/spool/xerox/qtmp exists and that you
have read and write access to it. Ask your system administrator to
verify that the installation procedure was successfully completed.
Can't pop file from internal table: <#>
There is an internal error, possibly due to a lack of memory.
Action Write down the message. Contact your system administrator and
verify that your system meets the minimum configuration
requirements.
Couldn't encode job ticket to file
An internal error occurred while the DocuPrint NPS printer was
writing to a local temporary file.
Action Write down the message and contact your system administrator.
Couldn't initialize internal table
There is an internal error, possibly due to a lack of memory.
Action Write down the message. Contact your system administrator and
verify that your system meets the minimum configuration
requirements.
Couldn't open list file
The file you specified with the -listFile option could not be opened.
Action Verify that you have read access to the file you specified.
DocPath__Create()
An internal error occurred.
Action Write down the message and contact your service representative.
Error changing to directory: <path>
The client software was unable to access the directory using the
specified path name.
Action Check the pathname specified and correct it if necessary.
Error creating temporary data file
Your software is missing an internal file that is needed for printing.
Action Verify that the directory /usr/spool/xerox/qtmp exists and that you
have read and write access to it. Ask your system administrator to
verify that the installation procedure was successfully completed.
UNIX WORKSTATION MESSAGES
52-3