Xerox DocuPrint 4050 NPS Message Manual page 41

Network printer series
Hide thumbs Also See for DocuPrint 4050 NPS:
Table of Contents

Advertisement

Message
F039
F040
F049
F059
F060
F061
F062
F063
F064
F065
XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE
HCFR lost machine
clock.
HCFR lost pitch reset.
Sample tray transparency
delivery contrary to
selection.
Coronode AC voltage out
of range.
Charge 2 Diocorotron
voltage out of range.
Transfer shield current
out of range.
Preclean shield current
out of range.
Developer bias voltage
out of range.
Toner roll bias voltage out
of range.
Cleaner roll bias voltage
out of range.
Explanation/action
There is an HCFT or CPM board failure or a machine clock
signal between CPM and HCFR.
1. Discard purged output.
2. Press the Continue button.
3. If problem persists, notify your service representative.
There is a CPM, MIR, or HCFR board failure or a harness
problem between CPM and MIR or PHR and HFCR.
1. Discard purged output.
2. Press the Continue button.
3. If problem persists, notify your service representative.
You sent a transparency to a destination other than the
sample tray.
1. Reprogram the job or remove the transparency from
the tray.
2. Press the Continue button.
There is a printer process control error.
1. Press the Continue button.
2. If problem persists, notify your service representative.
There is a printer process control error.
1. Press the Continue button.
2. If problem persists, notify your service representative.
There is a printer process control error.
1. Press the Continue button.
2. If problem persists, notify your service representative.
There is a printer process control error.
1. Press the Continue button.
2. If problem persists, notify your service representative.
There is a printer process control error.
1. Press the Continue button.
2. If problem persists, notify your service representative.
There is a printer process control error.
1. Press the Continue button.
2. If problem persists, notify your service representative.
There is a printer process control error.
1. Press the Continue button.
2. If problem persists, notify your service representative.
PRINTER CONTROLLER MESSAGES
48-21

Advertisement

Table of Contents
loading

Table of Contents