Mitsubishi Electric CR800-05VD Standard Specifications Manual page 124

7 Appendix
No. Name
25 Flange for connecting force
sensors to adapter plates
26 Screw for mounting flanges to
connect force sensors to
adapter plates
27 Positioning pin for flanges to
connect force sensors to
adapter plates
28 Screw for mounting flanges to
connect force sensors to
adapter plates
Note1) For information on hands, refer to
Fig.7-8: Overall view of the robot with the hand (HRC-03-099455) and a vision sensor mounted
Appendix-116 Connections of recommended hands, recommended vision sensors and the force sensor
Device used
Hand and vision
Hand only
sensor
- -
Page 10, "1.4.5 Recommended hands"
(○: Required, -: Not required)
Hand, vision
Hand and force
sensor, and
sensor
force sensor
○ ○
and contact the manufacturer.
Model
-
(Fabrication
Note1)
required)