EMS AIR-FLOW handy 3.0 PERIO Operation Instructions Manual page 101

If the handpiece falls
If there is leakage of powder through
the nozzle
• Check the amount of powder in your device
• Check the air pressure of the dental unit
• Change the nozzle
• Remove the residual powder in the channels of the handpiece with the EasyClean
• Send the unit to an approved EMS repair center
AIR-FLOW PERIO handpiece
•
•
AIR-FLOW PLUS Handpiece
• Check the state of the nozzle
• Replace the handpiece
•
• Reduce the volume of powder in the powder chamber
91