Clean And Maintain The Fixture; Clean The Fixture; Store The Retrofit - ETC Source 4WRD Color Installation And User Manual

Clean and Maintain the Fixture

Clean the Fixture

CAUTION:
other than oil-free canned air.
Use oil-free canned air to clean the
•
LED emitters prior to installation and
prior to storage.
Use oil-free canned air to clean the
•
fan and fin stack as part of regular
fixture maintenance.

Store the Retrofit

When not installed on a fixture, store the
•
Source 4WRD Color in its original packaging or
in a dust-resistant plastic bag.
Store the Source 4WRD Color at temperatures
•
of 5°C (41°F) or higher.
If you must store the Source 4WRD Color below
•
5°C (41°F), make sure it is in an upright
position as shown. Allow it to warm to room
temperature for a minimum of one hour before
applying power.
Source 4WRD Color Installation and User Manual
Do not touch or clean LED emitters with anything
Fan and
fin stack
Store with
LEDs facing up
19