Install Diffusion On Reflector - ETC Source 4WRD Color Installation And User Manual

Install Diffusion on Reflector

When you use the Source 4WRD Color with a Source Four fixture body,
you must install the diffusion provided with the Source 4WRD Color on
the output end of the reflector.
WARNING:
lamp. Using the diffusion with a Source Four HPL lamp can
result in damage to the diffusion and the fixture body.
1. With the shiny side of the diffusion
facing up, fold the four tabbed
corners of the diffusion along the
perforated lines.
2. Remove the lens tube and shutter
barrel from the fixture in order to
access the reflector housing.
a.
b.
8
Do not use the diffusion with a Source Four HPL
Remove the beam focus knob at the bottom of the shutter
barrel and remove the retaining bolt on the opposite side of
the shutter barrel. Slide the lens tube out of the shutter barrel.
Loosen the barrel rotation knob at the bottom of the reflector
housing and loosen the retaining bolt on the opposite side of
the reflector housing. Rotate the shutter barrel and remove it
from the reflector housing.
Beam
focus
knob
Source 4WRD Color Installation and User Manual
Retaining
bolts
Shiny side
facing up
Fold corners x4
Reflector
housing
Barrel
rotation
knob