Update The Fixture Software - ETC Source 4WRD Color Installation And User Manual

5. Press the Up button and Down button simultaneously to restore
default settings.
Note:
button or Down button. These options are:
Udt
•
btL
•
the failure of software updates. Contact ETC Technical
Services for assistance (see
on
tSt
•
rtn
•

Update the Fixture Software

ETC recommends using UpdaterAtor software to manage software
updates. For more information on UpdaterAtor, see the UpdaterAtor
Software Quick Guide , which you can download for free from
etcconnect.com.
When you add a Source 4WRD Color fixture running a newer software
version or update a Source 4WRD Color fixture to a newer software
version using UpdaterAtor, you can use that fixture to push the newer
software version to all connected Source 4WRD Color fixtures.
Note:
not need to disconnect them before pushing the updated fixture
software. The update process will ignore any other fixture types in
the DMX run.
1. Remove power and DMX In from the fixture that is running the
software version that you want to push to other fixtures.
2. Press and hold the Up button and Down button simultaneously
while restoring power.
3.
The display shows
4. Press the Up button and Down button simultaneously to start the
update process.
The display alternates between
•
complete while updating.
The display blinks once to indicate that the update is complete.
•
5. Reconnect DMX In on the fixture.
18
There are other options that display as you press the Up
: See Update the Fixture Software
: Force the fixture into bootloader mode to troubleshoot
page 2).
: Used internally by ETC.
: Return to the standard display.
If you have other types of fixtures in your DMX run, you do
Udt
Source 4WRD Color Installation and User Manual
Help from ETC Technical Services
to indicate the update mode is selected.
Udt
below.
and the percentage