Table of Contents
Advertisement
2. Lift the PDB module and disconnect the intrusion cable.
Figure 53. Removing the PDB module
3. Remove the screws securing the PDB.
4. Move the PDB away from the bracket.
Figure 54. Removing the PDB
Next steps
1.
Install the
PDB.
Installing the power distribution board
Prerequisites
WARNING:
Allow the power distribution board (PDB) to discharge after you power off the system. Handle the
PDB by the edges and avoid touching the contact surfaces of the connectors.
1. Follow the safety guidelines listed in
52
Installing and removing enclosure components
safety
instructions.
Advertisement
Table of Contents
