Document type:
Title:
User's Manual (MUT)
Mod. V2718 VME PCI Optical Link Bridge
4.3.52.
4.3.53.
4.3.54.
NPO:
00106/03:V2718.MUTx/11
CAENVME_WriteFlashPage
Parameters:
[in] Handle
[in] Data
[in] PageNum : The flash page number to write.
Returns:
An error code about the execution of the function.
Description:
The function writes the data into the specified flash page.
CAENVME_API
CAENVME_WriteFlashPage(long
PageNum).
CAENVME_SetInputConf
Parameters:
[in] Handle
[in] InSel
enum).
[in] InPol
[in] LEDPol
Returns:
An error code about the execution of the function.
Description:
The function permits to configure the input lines of the module. It can
be specified the polarity for the line and for the LED.
CAENVME_API
CAENVME_SetInputConf(long Handle, CVInputSelect InSel, CVIOPolarity
InPol, CVLEDPolarity LEDPol).
CAENVME_SetLocationMonitor
Parameters:
[in] Handle
[in] Address
[in] Write
[in] Lword
[in] Icak
Returns:
An error code about the execution of the function.
Description:
The function sets the Location Monitor.
CAENVME_API
Filename:
V2718_REV11.DOC
Revision date:
03/07/2018
: The handle that identifies the device.
: The data to write.
Handle,
: The handle that identifies the device.
: The input line to configure (see CVInputSelect
: The input line polarity (see CVIOPolarity enum).
: The output LED polarity (see CVLEDPolarity enum).
: The handle that identifies the device.
:
:
:
:
Revision:
11
unsigned
char
*Data,
Number of pages:
79
int
Page:
77