Caenvme_Getbusreqlevel; Caenvme_Gettimeout; Caenvme_Getfifomode - Caen V2718 Technical Information Manual

Document type: Title:
User's Manual (MUT) Mod. V2718 VME PCI Optical Link Bridge
4.3.37.
Parameters:
Returns:
Description:
CAENVME_API
CAENVME_GetBusReqLevel(long Handle, CVBusReqLevels *Value).
4.3.38.
Parameters:
Returns:
Description:
CAENVME_API
CAENVME_GetTimeout(long Handle, CVVMETimeouts *Value).
4.3.39.
Parameters:
Returns:
Description:
CAENVME_API
CAENVME_GetFIFOMode(long Handle, short *Value).
NPO:
00106/03:V2718.MUTx/11

CAENVME_GetBusReqLevel

[in] Handle : The handle that identifies the device.
[out] Value : The type of VME bus requester priority level
(see CVBusReqLevels enum).
An error code about the execution of the function.
The function reads the VME bus requester priority level implemented on the
module.

CAENVME_GetTimeout

[in] Handle : The handle that identifies the device.
[out] Value : The value of VME bus timeout (see CVVMETimeouts enum).
An error code about the execution of the function.
The function reads the specified VME bus timeout setting of the module.

CAENVME_GetFIFOMode

[in] Handle : The handle that identifies the device.
[out] Value : The FIFO mode read setting.
An error code about the execution of the function.
The function reads whether the auto increment of the VME addresses during
the block transfer cycles is enabled (0) or disabled (!=0).
Filename:
V2718_REV11.DOC
Revision date: Revision:
03/07/2018 11
Number of pages:
79
Page:
72