Pulser B 0 Register; Pulser B 1 Register; Scaler 0 Register; Fig . 22: Pulserb 0 Register - Caen V2718 Technical Information Manual

Document type: Title:
User's Manual (MUT) Mod. V2718 VME PCI Optical Link Bridge
2.13.19.
This register allows to set the period and width of the relevant Pulser, measured in range
steps (see § 2.13.20).
15 14
2.13.20.
This register allows to set the number of pulses and the range of the relevant Pulser.
15 14
RANGE:
2.13.21.
This register allows to set the Scaler END_COUNT_LIMIT and to enable the
AUTO_RESET option (1 = enabled).
15 14
NPO:
00106/03:V2718.MUTx/11

Pulser B 0 register

(Base Address + 0x19, D16, read/write)
13 12 11 10 9
Fig. 22: Pulser B 0 register

Pulser B 1 register

(Base Address + 0x1A, D16, read/write)
13 12 11 10 9
Fig. 23: Pulser B 1 register
00 → 25 ns
01 → 1.6 µs
10 → 400 µs
11 → 104 ms

Scaler 0 register

(Base Address + 0x1C, D16, read/write)
13 12 11 10 9
Fig. 24: Scaler 0 register
Filename:
V2718_REV11.DOC
8 7 6 5 4
8 7 6 5 4
8 7 6 5 4
Revision date: Revision:
03/07/2018 11
3 2 1 0
PERIOD
WIDTH
3 2 1 0
NUM_PULSES
RANGE
3 2 1 0
END_COUNT_LIMIT
AUTO_RES
Number of pages:
79
Page:
31