Caenvme_Init; Caenvme_Boardfwrelease; Caenvme_End - Caen V2718 Technical Information Manual

Document type: Title:
User's Manual (MUT) Mod. V2718 VME PCI Optical Link Bridge

4.3.2. CAENVME_Init

Parameters:
Returns:
Description:
CAENVME_API
CAENVME_Init(CVBoardTypes BdType, short Link, short BdNum, long *Handle);

4.3.3. CAENVME_BoardFWRelease

Parameters:
Returns:
Description:
CAENVME_API
CAENVME_BoardFWRelease(long Handle, char *FWRel);

4.3.4. CAENVME_End

Parameters:
Returns:
Description:
CAENVME_API
CAENVME_End(long Handle);
NPO:
00106/03:V2718.MUTx/11
[in] BdType : The model of the bridge (V2718).
[in] Link : The index of the A2818.
[in] BdNum : The board number in the link.
[out] Handle : The handle that identifies the device.
An error code about the execution of the function.
The function generates an opaque handle to identify a module
attached to the PC. It must be specified only the module index (BdNum)
because the link is PCI.
[in] Handle : The handle that identifies the device.
[out] FWRel : Returns the firmware release of the device.
An error code about the execution of the function.
Permits to read the firmware release loaded into the device.
[in] Handle: The handle that identifies the device.
An error code about the execution of the function.
Notifies the library about the end of work and free the allocated
resources.
Filename:
V2718_REV11.DOC
Revision date: Revision:
03/07/2018 11
Number of pages:
79
Page:
57