Caenvme_Clearoutputregister; Caenvme_Pulseoutputregister; Caenvme_Readdisplay; Display - Caen V2718 Technical Information Manual

Document type: Title:
User's Manual (MUT) Mod. V2718 VME PCI Optical Link Bridge
4.3.25.
Parameters:
Returns:
Description:
CAENVME_API
CAENVME_ClearOutputRegister(long Handle, unsigned short Mask).
4.3.26.
Parameters:
Returns:
Description:
CAENVME_API
CAENVME_PulseOutputRegister(long Handle, unsigned short Mask).
4.3.27.
Parameters:
Returns:
Description:
CAENVME_API
CAENVME_ReadDisplay(long Handle, CVDisplay *Value).
NPO:
00106/03:V2718.MUTx/11

CAENVME_ClearOutputRegister

[in] Handle : The handle that identifies the device.
[in] Mask : The lines to be cleared.
An error code about the execution of the function.
The function clears the specified lines. Refer the CVOutputRegisterBits
enum to compose and decoding the bit mask.

CAENVME_PulseOutputRegister

[in] Handle : The handle that identifies the device.
[in] Mask : The lines to be pulsed.
An error code about the execution of the function.
The function produces a pulse on the specified lines by setting and
then clearing them. Refer the CVOutputRegisterBits enum to compose and
decode the bit mask.

CAENVME_ReadDisplay

[in] Handle : The handle that identifies the device.
[out] Value : The values read from the module (see CVDisplay enum).
An error code about the execution of the function.
The function reads the VME data display on the front panel of the module.
Refer to the CVDisplay data type definition and comments to decode the
value returned.
Filename:
V2718_REV11.DOC
Revision date: Revision:
03/07/2018 11
Number of pages:
79
Page:
68