Document type:
Title:
User's Manual (MUT)
Mod. V2718 VME PCI Optical Link Bridge
3.4. V2718 and A2818/A3818 External components
3.4.1. V2718 connectors
The location of the connectors is shown in Fig. 3.1. Their electromechanical
specifications are listed here below.
5
TX/RX
:
PROGRAMMABLE In/Out:
3.4.2. V2718 buttons
SYSRES pushbutton: Long touch (>2 s) for SYSRES generation
3.4.3. A2818 connectors
The location of the connectors is shown in Fig. 3.1. Their electromechanical
specifications are listed here below.
TX/RX:
3.4.4. A3818 connectors
The location of the connectors is shown in Fig. 3.1. Their electromechanical
specifications are listed here below.
TX/RX:
5
Two Leds indicate the Link activity: green = connection active, yellow = data transfer
NPO:
00106/03:V2718.MUTx/11
Short touch for Manual START of Pulsers (see § 3.6.1)
Filename:
V2718_REV11.DOC
Revision date:
03/07/2018
Mechanical specifications:
LC type connector; to be used with
Multimode 62.5/125µm cable with LC
connectors on both sides
Mechanical specifications:
LEMO 00 connectors
Electrical specifications:
standard NIM/TTL signals (dip switch
selectable), 50 impedance
Mechanical specifications:
LC type connector; to be used with
Multimode 62.5/125µm cable with LC
connectors on both sides.
Mechanical specifications:
LC type connector; to be used with
Multimode 62.5/125µm cable with LC
connectors on both sides.
Number of pages:
79
Revision:
11
Page:
37