Location Monitor Address Low Register; Location Monitor Address High Register; Location Monitor Control Register; Ba Rotary Switches Status Register - Caen V2718 Technical Information Manual

Document type: Title:
User's Manual (MUT) Mod. V2718 VME PCI Optical Link Bridge
2.13.29.
This register allows to set/monitor the Location monitor Address bits[15..0]; see § 2.7.
15 14 13
2.13.30.
This register allows to set/monitor the Location monitor Address bits[31..16]; § 2.7.
15 14 13
2.13.31.
This register allows to set/monitor the Location monitor control parameters; see § 2.7
15 14 13
2.13.32.
This register is available from firmware revision 2.17 on. It allows to read the value of the
2 on-board rotary switches (see § 2.6 and § 3.5.1). This information can be used to
identify multiple Bridges connected to a single PC.
15 14 13
NPO:
00106/03:V2718.MUTx/11

Location Monitor Address Low register

(Base Address + 0x28, D16, read/write)
12 11 10 9 8
LMON_AD [15:0]
Fig. 32: Location Monitor Address Low register

Location Monitor Address High register

(Base Address + 0x29, D16, read/write)
12 11 10 9 8
LMON_AD [31:16]
Fig. 33: Location Monitor Address Low register

Location Monitor Control register

(Base Address + 0x2C, D16, read/write)
12 11 10 9 8 7
Fig. 34: Location Monitor control register

BA Rotary Switches Status register

(Base Address + 0x36, D16, read)
12 11 10 9 8 7
Fig. 35: BA Rotary Switches Status register
Filename:
V2718_REV11.DOC
7 6 5 4 3 2
7 6 5 4 3 2
6 5 4 3 2 1
6 5 4 3 2 1
Revision date: Revision:
03/07/2018 11
1 0
1 0
0
ADDRESS_MODIFIER
LWORD
IACK
WRITE
0
SW 9
SW 8
Number of pages:
79
Page:
34