Using The Bypass Tray; Loading The Bypass Tray - Xerox WORKCENTRE 4150 User Manual

Using the Bypass Tray

Loading the Bypass Tray

Remove any curl
on postcards, envelopes
and labels before
loading them into the
Bypass Tray.
Xerox WorkCentre 4150 User Guide
The bypass tray is located on the right side of your machine. It can be closed
when not in use, making the product more compact. Use the bypass tray to
print transparencies, labels, envelopes or postcards in addition to making
quick runs of paper types or sizes that are not currently loaded in the paper
tray. Acceptable print media is plain paper with sizes ranging from B5 - SEF
to 11" x 14" (176 mm x 250 mm to 279 mm x356 mm) and weighing between
16 lb and 24 lb (60 g/m
1.
Lower the bypass tray, located on the right side of the product and unfold
the paper support extension.
2.
Prepare a stack of paper or envelopes for loading by flexing or fanning
them back and forth. Straighten the edges on a level surface.
3.
Load the print material with the
print side facing down and
against the right edge of the
tray.
NOTE:
Hold transparencies by the
edges and avoid touching the print
side.
4.
Adjust the paper guide to the
width of the stack of print
material. Ensure you have not
loaded too much print media.
The stack should be under the
Max. Fill Line.
and 90 g/m ).
2 2
Paper Guide
8 Paper and other Media
Bypass Tray
Max Fill Line
101