Xerox WORKCENTRE 4150 User Manual page 171

Xerox WorkCentre 4150 User Guide
Reset User Interface
Rebooting / Restarting the User Interface will cause the Power On Self-Test
cycle to begin. The User Interface will pause for several seconds before
starting the Reboot process.
Application Checksum Verification
The User Interface Application Checksum Verification checks that the UI
software is up-to-date and running correctly.
1.
Select Start Test to begin the test. A message will be displayed
indicating that the test in progress. A second message will then be
displayed indicating whether or not the test was completed successfully.
9 Setups
149