Safety - Xerox WORKCENTRE 4150 User Manual

Safety

Xerox WorkCentre 4150 User Guide
Read these safety notes carefully before using this product to ensure you
operate the equipment safely.
Your Xerox product and supplies have been designed and tested to meet strict
safety requirements. These include Safety Agency approval, and compliance
to established environmental standards. Please read the following instructions
carefully before operating the product and refer to them as needed to ensure
the continued safe operation of your product.
The safety testing and performance of this product have been verified using
XEROX materials only.
Follow all warnings and instructions marked on, or supplied with the product.
This WARNING mark alerts users to the possibility of personal injury.
This WARNING mark alerts users to heated surfaces.
WARNING:
This product must be connected to a protective earthing
circuit.
Operator Accessible Areas
This equipment has been designed to provide operator access to safe areas
only. Operator access to hazardous areas is restricted using covers or guards,
which require a tool to enable removal. Never remove these covers or guards.
Maintenance
Any operator maintenance procedures will be described in the customer
documentation supplied with the product. Do not to carry out any maintenance
on this product, which is not described in the customer documentation.
• This product is equipped with a 3-wire type plug, provided with a protective
earthing pin. This plug will fit only into an earthed power outlet. This is a
safety feature. To avoid risk of electric shock, contact your electrician to
replace the receptacle if you are unable to insert the plug into the outlet.
Never use an earthed adapter plug to connect the product to a power
source receptacle that lacks an earth connection terminal.
• This product should be operated from the type of power source indicated
on the marking label. If you are not sure of the type of power available,
consult your local power company.
1 Welcome
7