Errors & Faults
Finisher Fault
Stapler Fault
Stacker Fault
DADF
DADF Jam
Load Document
Xerox WorkCentre 4150 User Guide
Description
Finisher component not
functioning correctly.
Stapler unit does not work.
Stacker unit does not work.
The loaded document has
jammed in the DADF.
You have attempted to set up
a job with document not
loaded or incorrectly loaded
in the DADF.
12 Troubleshooting
Solution
Open finisher door and check the
finisher. Close finisher door.
If the fault persists, Power Off /
Power On.
If the problem persists, call for
service.
Open finisher door and check the
stapler. Close finisher door.
If the fault persists, Power Off /
Power On.
If the problem persists, call for
service.
Open finisher door and check the
finisher. Close finisher door.
If the fault persists, Power Off /
Power On.
If the problem persists, call for
service.
Open DADF cover and remove
jammed media.
Load document in DADF.
If already loaded, remove and
reload.
175