Xerox WORKCENTRE 4150 User Manual page 196

12 Troubleshooting
Errors & Faults
CRU
Toner Low
Toner Empty
Drum Warning
Replace Drum
Toner Cartridge Not
Installed
Toner Supplying Error
Invalid Toner Cartridge
Invalid Drum Cartridge
Finisher
Finisher Jam
Full Stack
Staple Cartridge Not
Installed
Door Open
174
Description
Toner cartridge is almost
empty.
Toner cartridge is empty.
The drum cartridge is near
the end of life.
The drum cartridge has
reached the end of life.
The toner cartridge is not
installed, or is not installed
correctly.
Toner is not being supplied
correctly.
The installed toner cartridge
is not a valid Xerox cartridge.
The installed drum cartridge
is not a valid Xerox cartridge.
Copy paper jammed in
finisher.
Output tray full.
Staple cartridge not installed.
Finisher door open.
Solution
Open side cover and right side
front door.
Remove toner cartridge and gently
shake it. By doing this, printing
operations can be temporarily
resumed.
Reinstall toner cartridge.
Reorder toner cartridge.
Open side cover and right side
front door.
Replace with new toner cartridge.
Ensure a replacement cartridge is
in stock.
TM
Replace the SMart Kit
Cartridge.
Install the toner cartridge.
If already installed, check it has
been installed correctly.
If problem persists, call for service.
Remove the seal tape from the
SMart Kit Drum Cartridge.
Check the toner cartridge is
installed securely.
Check the toner cartridge and
install a valid Xerox cartridge if
necessary.
If problem persists, call for service.
Check the drum cartridge and
install a valid Xerox cartridge if
necessary.
If problem persists, call for service.
Open finisher front cover and
remove jammed paper in the
finisher and fuser area.
Remove printed material from
Output tray.
Install staple cartridge.
Close finisher door.
Xerox WorkCentre 4150 User Guide
Drum