Setting Up Paper Trays - Xerox WORKCENTRE 4150 User Manual

Setting up Paper Trays

Tray Confirmation Messages
Default Paper
Paper Substitution
Auto Tray
Xerox WorkCentre 4150 User Guide
This feature enables the Tray Confirmation message on the display screen.
The Tray Confirmation message appears when new stock is loaded into the
paper trays. The user must confirm the paper size and paper type of the new
stock.
Go To Tools > System Settings > Tray Management > Tray Confirmation
Messages
The Default Paper settings allows the programming of the default paper type
and color. Typically, this is the most common stock that will be used in the
machine and is the stock that the machine will feed if a specific stock type is
not selected.
Go To Tools > System Settings > Tray Management > Default Paper
This feature enables the machine to automatically substitute common US and
metric paper sizes when printing.
If the feature has been turned off, the machine will hold the job and indicate
that the appropriate paper size should be loaded. If this feature is set to On,
the machine will automatically substitute the sizes shown on the screen below.
Go To Tools > System Settings > Tray Management > Paper Substitution
When the On button is selected, the Auto Tray feature automatically selects
the paper tray loaded with the paper size closest to the original document.
This can be overridden on the Basic Copy screen by manually selecting the
required tray.
9 Setups
123