Xerox WORKCENTRE 4150 User Manual page 122

8 Paper and other Media
The paper trays
can hold a maximum of
520 sheets of 20 lb (80
2
g/m ) bond paper.
When printing from
your PC, ensure you
select the Select Paper
button to specify the
correct paper size, color
and type. Not confirming
the paper details may
result in printing delays.
100
3.
Fan the paper and insert it into the tray. If loading Letterhead, ensure the
design is face-up and the top edge of the sheet is placed at the right side.
Side Paper
Guide
CAUTION:
Do not fill above the Maximum Fill Line.
4.
Position the side guide by
squeezing the lever and sliding it
towards the stack of paper, until it
gently touches the side of the
stack. Do not allow the guide to
press against the edge of the
paper tightly.
5.
Close the paper tray.
6.
The UI screen shows the current paper supply settings for Tray 1 on the
left hand side. Press the Change Size button and/or the Change Type
and Color button to change the settings if necessary. If the settings are
correct, press the Confirm button. Please refer to Setting the Paper Size
in the Paper and other Media chapter on page 103.
Xerox WorkCentre 4150 User Guide
Max Fill Line