Appletalk; Information Checklist; Procedure - Xerox WorkCentre 4260 Series System Administration Manual

3 Network Installation
•
•
Traps:
•
•
• Delete – Selecting a trap on the [SNMP Configuration > Advanced] page and clicking
this button deletes the trap. You can select and delete multiple traps at once.
SSDP
Allows you to configure the SSDP protocol settings as follows:
•
•

AppleTalk

Information Checklist

Before starting the installation procedure, please ensure that the following items are
available and/or the tasks have been performed:
1. Existing operational AppleTalk network.
AppleTalk Name to assign to your printer.
2.
3. AppleTalk Zone (if used) where your printer will reside.

Procedure

Setup AppleTalk at the machine
1. Press the <Log In/Out> button on the machine to enter the Tools Pathway.
2. Enter the Administrator's Password. The default is 1111.
3. Touch [Enter].
4. Press the <Machine Status> button.
5. Touch the [Tools] tab.
6. Touch [Connectivity and Network Setup].
7. Touch [Advanced].
Touch [Network Setting].
8.
9. Touch [Network Setup].
10. Touch [AppleTalk].
11. Touch [Protocol].
12. Touch [Enable].
22
IPX Socket Number: Enter the IPX socket number of the SNMP agent.
SNMP Version: Select the SNMP version of the SNMP agent.
TRAP Community Name: Enter the trap community name of the SNMP agent.
Trap to be Received: Select the types of traps to receive from the SNMP agent.
Protocol – Displays whether the protocol is enabled or disabled.
Time to Live – Specify the maximum TTL (time to live).
Xerox WorkCentre 4260 Series System Administration Guide