Install Clone File To Another Device - Xerox WorkCentre 4260 Series System Administration Manual

NOTE:
6. Click on [Save]. The [.dlm] file can now be used to clone other machines.

Install Clone File to another Device

NOTE: This procedure will cause the machine to reboot. It will be unavailable over the
network for several minutes.
1. At your Workstation, open the web browser, enter the TCP/IP Address of the machine
in the Address bar.
2. Press [Enter].
3. Click on the [Properties] tab.
4. Click on the [General Setup] link.
5. Click on the [Cloning] link.
6. In the [Install Clone File] area, click on the [Browse] button.
If prompted, enter the Administrator's User ID [admin] and Password [1111] and
click on [Login].
7. Click on the [.dlm] cloning file located on the laptop or PC.
8. Click on [Open].
9. Click on [Install] to submit the file to the machine.
The machine will not be available over the network for several minutes.
Xerox WorkCentre 4260 Series System Administration Guide
You can save the Clone file onto a laptop or PC.
Cloning
35