Xerox WorkCentre 4260 Series System Administration Manual page 185

Problem
I cannot scan to an FTP site.
Xerox WorkCentre 4260 Series System Administration Guide
If you are using FTP to file scanned images, follow these instructions
to check that the service is configured correctly:
1. Open a command prompt window from your Workstation:
a) Click on [Start].
b) Click on [Run].
c) Enter cmd.
d) Click on the [OK] button.
2. In the [Command Prompt] window, enter ftp then enter a
space, then enter the IP Address of your FTP Server. For
example: C:\>ftp 192.221.13.4 (where the IP Address of your
FTP server is 192.221.13.4).
Press [Enter] on your keyboard.
3.
4. At the 'User' prompt enter the username for the account you
created for the machine scanner. For example: User
<192.221.13.4:<none>>: xerox (where the Username is xerox).
5. At the 'Password' prompt enter the password for the account
you created for the machine scanner. For example: Password:
machine (where the password for the account is 'machine').
6. A response of 'User Username logged in' will appear if the FTP
server is correctly configured. If you cannot log in, open your
FTP server settings and check that the Read and Write boxes
are enabled, if applicable. If you have a 'Read Only' box -
ensure that this is not enabled.
7. Check the User account and password are correctly configured.
8. Check the User account has the appropriate rights to access
the directory where scans are filed.
If you are able to log in to the FTP server, try creating a directory in the
scan directory to check write access. To do this:
Within the Command Prompt screen, log in to your FTP server
1.
using the steps above.
Type mkdir xerox to create a directory called xerox.
2.
3. A response of 'MKD Command Successful' will appear if the
directory has been created. If 'Permission denied' appears,
ensure that the User account has full read and write access
rights to the scanning directory (repository).
4. Type rm xerox to delete the directory called xerox.
Type quit to end the FTP session.
5.
6. Type exit to close the command prompt window.
Network Scanning
Action
173