Xerox 480 ST System Administration Manual page 288

Problem
Protocol not running
Remote directory lock failed
Page 20 - 38
Corrective Action
A user tried a scanning operation with a
destination on the NetWare server.
• The NetWare protocol is not currently
enabled. Enable it.
The repository that you are attempting to
send a job into with a scanning operation is
in use by another Document Centre.
Check the following:
• The specified volume name is
invalid.
• The specified filing destination (path)
is invalid.
• The destination disk is full, prevent-
ing the creation of the remote direc-
tory.
Xerox Document Centre System Administration Guide