Xerox 480 ST System Administration Manual page 105

NOTE
Xerox Document Centre System Administration Guide
3. Configure Access Lists and Print Destination.
a) The Access Lists screen will be displayed.
b) Press the F10 key to accept the defaults.
c) The Add a Destination screen will be displayed.
d) Select PCPrint and press Enter.
e) From the Destination Attributes Screen, enter the
Document Centre user name as the PCPRINT ST name
and Description, and then press the F10 key.
The PCPrint ST name must be the same as the user name created
and must also match the Street Talk (user) Name entered at the
printer.
f) The Output Strings Screen will be displayed. Press the
F10 key to accept the defaults displayed on the screen.
g) The Enable Strings Screen will be displayed. Press the
F10 key to accept the defaults displayed on the screen.
h) Select No and press Enter when you are prompted to
add another destination.
4. Enable the Print Queue.
a) The Print Queue Status Screen will be displayed.
b) Change the Printing jobs and the Accepting jobs fields
to Yes and then press the F10 key.
c) A message will be displayed stating that the printer is
ready to accept and print jobs. Press the F10 key to
continue.
d) The Manage A Service screen will be displayed.
e) Press the Escape Key to return to the Manage Services
main menu.
5. Power off and power on the Document Centre for these setup
options to take effect.
Page 15 - 5