Table of Contents
Advertisement
NetWare Troubleshooting
Xerox Document Centre System Administration Guide
NetWare troubleshooting steps
This procedure assumes that the printer is turned on and, connected
to a functioning network port with the correct cabling.
Obtain a Configuration Report from your printer.
1. Enter the Tools pathway.
a) Press the Access (
b) On the keypad enter 1111 or the current password. Press
the Enter button when finished. The Touch Screen will
be used for the remainder of the data entry, unless
instructed otherwise.
c) Press the Go to Tools button.
d) Select System Setting.
e) Select Configuration Report.
f)
Select Print Configuration Report Now.
g) Press the Cancel button.
h) Press the Exit Tools button.
2.
Allow a minute for the Report to print.
or
) button.
Page 17 - 5
Advertisement
Table of Contents
Troubleshooting
