Set Up Scanning - Netware; Before You Start - Xerox 480 ST System Administration Manual

Set Up Scanning - NetWare

Before You Start

NOTE
NOTE
Xerox Document Centre System Administration Guide
Prior to starting the installation procedure, perform the following:
1. Ensure that the Document Centre is connected, configured, and
operating correctly as a printer.
2. Use the SYSCON utility for NetWare 3.x, or NWADMIN for
NetWare 4.x to create a user account on the file server for the
scanner.
3. Create a directory on the file server to be used as a repository for
scanned files. Give the scanner user account all access rights to
this directory, except supervisor. The repository name cannot
exceed 8 characters.
Refer to the NetWare documentation for additional information.
When a document is scanned, the Document Centre logs into the
scanner user account with the user name and password, transfers
the file to the repository in the server, and then logs out.
The Document Centre supports TIFF and PDF File Formats.
Page 20 - 15